Bathmate HydroXtreme Valve Repair Kit

Included: Hydromax valve - 2 pcs; Hydromax valve cap - 1 pc; special keychain-wrench for unscrewing the valve - 1 pc.

To disassemble the valve, use the special keychain-wrench. Disassembly: - Locate the special grooves on the valve cap. - Insert the flat part of the wrench into one of the grooves and carefully lift the valve cap up by approximately 1 mm. Use moderate pressure to avoid damaging the plastic. - Similarly, lift the valve cap from the other side by 1 mm. Try to remove the cap by pulling it upwards. If you cannot remove the valve cap, try again. - Once the cap is removed, take out the valve to replace it with a new one.

Assembly: - Place the new valve in position, with the soft seal facing down. - Place the valve cap back onto the housing and ensure that the valve moves freely in the cap's groove. - Then press down on the cap until it snaps into place. Use steady but moderate pressure to avoid damaging the valve or its cap. - Done!